Pair 60w Active Loudspeakers

Vision’s professional 5.25″ powered bookshelf speakers are purpose-built for any audio-visual presentation environments such as classrooms and meeting rooms, or bars and restaurants. They are simple to install and control. Perfect for meeting spaces or small rental applications.Bt activation software and instructions

Serial Control
RS-232 control allows this audio system to be controlled by a control system like Vision’s own Techconnect Control. Tone and volume can be adjusted or inputs selected via RS-232.Note: this product does not have a remote control.

Auto Standby
Auto-standby is on by default. It can be disabled via RS-232. Note: Video does not trigger auto-standby. Only audio affects auto-standby.

Bass Reflex
A bass reflex port allows greater excursion of the woofer, allowing the woofer to produce lower frequencies, and the phase-delayed movement of air from behind the woofer to the front reinforces the bass even more.

5.25″ Woofer
These loudspeakers use a 5.25 inch woofer – the most popular size for classroom, meeting room, and boardroom applications. They are complemented with a 0.5″ inch Mylar dome tweeter.

Horizontal C bracket
The adjustable brackets allow the installer to easily angle side to side, or up and down. Or leave the brackets off and use as shelf speakers.

Rugged Grille
Attractive and robust, the thick metal grille protects the drivers from physical interference.

Memory
When power is connected the SP-1900P automatically comes on and remembers the previous volume setting. Restoring power brings the loudspeakers back to life automatically.

Stereo Input
The 2-Phono (RCA) input makes it quick and easy to get up and running.

Bluetooth
Connect from your phone or tablet without missing a beat. By default the speakers auto-switch from the line-level input when Bluetooth is paired.

A button on the rear turns BT off if you don’t need it
The PIN and Bluetooth name cannot be changed
The speakers have only one Bluetooth memory slot and will automatically connect to the most recent device. To unpair an unwanted device manually wait until that device is out of range then pair a new device. They can only pair to one device at a time.